|
|
XPR-9TF Bendpak Two Post 9,000 lb Lift
1-877-2ARESCO
or 1-877-227-3726
22150 Eight Mile Rd. Southfield MI. 48033
Specializing in car & truck lifts, brake lathes, pipe benders, tire changers, and wheel balancers, and much more! ARESCO is the source
for all of your automotive equipment needs. We carry a full line of equipment and replacement parts for most makes and models. With over
25 years of experience in the automotive industry, we at ARESCO are committed to providing our customers with quality products and
service.
Home Two Post Lifts Four Post Parking Lifts Heavy Duty Lifts Alignment Lifts Scissor Lifts Motorcycle Lifts
Shop Equipment Brake Lathes Pipe Benders Alignment Machines Wheel Balancers Tire Changers Air Compressors
Copyright©2014 www.aresco.org all rights reserved web design by M.Miller
Features & Specs
9,000 lb. Capacity
Single-Piece Columns
Safety Lock Release Handle
Equalizing Cables
Chain Lifting System Combined with Dual Hydraulic Cylinders
Plated Arm Restraints and Arm Pins for Rust Prevention
9,000 lb. Capacity
Single-Piece Columns
Safety Lock Release Handle
Equalizing Cables
Chain Lifting System Combined with Dual Hydraulic Cylinders
Plated Arm Restraints and Arm Pins for Rust Prevention
Capacity
Lifting Capacity* 9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
Rise
A - Rise: 69" (1,753 mm)
D - Min. Height + Pad: 4.75" (121 mm)
Time to Full Rise: ˜45 seconds
Outside Dimensions
E - Height Overall: 123.25" (3,131 mm)
F - Width Overall: 132" (3,353 mm) or 145" (3,683 mm)
G - Outside Columns: 124.75" (3,169 mm) or 137.75" (3,499 mm)
Inside Dimensions
H - Inside Columns: 105" (2,667 mm) or 118" (2,997 mm)
I - Drive-Thru Clearance: 91" (2,311 mm) or 104" (2,642 mm)
Arms & Pads
K - Front Arm Reach: (MIN) 25.5" (648 mm)
K - Front Arm Reach: (MAX) 49.5" (1,257 mm)
L - Rear Arm Reach: (MIN) 32.25" (819 mm)
L - Rear Arm Reach: (MAX) 52.5" (1,334 mm)
Floorplate
L - Height: 1.5" (38 mm)
M - Width: 8.5" (216 mm)
Power Unit
Motor: 220 VAC, 60 Hz, 1 Phase
Lifting Capacity* 9,000 lbs. (4,082 kg)
*Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
*Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
Rise
A - Rise: 69" (1,753 mm)
D - Min. Height + Pad: 4.75" (121 mm)
Time to Full Rise: ˜45 seconds
Outside Dimensions
E - Height Overall: 123.25" (3,131 mm)
F - Width Overall: 132" (3,353 mm) or 145" (3,683 mm)
G - Outside Columns: 124.75" (3,169 mm) or 137.75" (3,499 mm)
Inside Dimensions
H - Inside Columns: 105" (2,667 mm) or 118" (2,997 mm)
I - Drive-Thru Clearance: 91" (2,311 mm) or 104" (2,642 mm)
Arms & Pads
K - Front Arm Reach: (MIN) 25.5" (648 mm)
K - Front Arm Reach: (MAX) 49.5" (1,257 mm)
L - Rear Arm Reach: (MIN) 32.25" (819 mm)
L - Rear Arm Reach: (MAX) 52.5" (1,334 mm)
Floorplate
L - Height: 1.5" (38 mm)
M - Width: 8.5" (216 mm)
Power Unit
Motor: 220 VAC, 60 Hz, 1 Phase
The XPR-9TF two-post lift has been built from the ground up for
professional shops. Powerful and secure, this lift is sure to get
the job done. It boasts an incredibly rapid lifting system and a
robust menu of features to increase proficiency and productivity.
The end result is lower operating expenses and enhanced
efficiency. When you want to get more done in less time, you’re
going to want the XPR-9TF.
Wide and Narrow Installation
The XPR-9TF allows you to work in either a wide or narrow configuration. With a wide configuration you’ll be able to raise wider vehicles if you have the space for it. If you are limited on space, narrow installation is the way to go.
These two-post lift models have the capacity to effortlessly lift full-size pickups and commercial vehicles, yet they still provide specific capabilities for sport and compact cars, both foreign and domestic. The XPR-9TF is a rugged model with a 9,000-lb. maximum capacity, making it perfect for most if not all automotive shops. When it comes to ease-of-use, it doesn’t get much better than the XPR-9TF.
The XPR-9TF allows you to work in either a wide or narrow configuration. With a wide configuration you’ll be able to raise wider vehicles if you have the space for it. If you are limited on space, narrow installation is the way to go.
These two-post lift models have the capacity to effortlessly lift full-size pickups and commercial vehicles, yet they still provide specific capabilities for sport and compact cars, both foreign and domestic. The XPR-9TF is a rugged model with a 9,000-lb. maximum capacity, making it perfect for most if not all automotive shops. When it comes to ease-of-use, it doesn’t get much better than the XPR-9TF.